 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Round Yellow Through-hole LED Lamp (5 mm) OVLFY3C7 x x x High brightness with well-defined spatial radiation patterns UV-resistant epoxy lens Yellow (589 nm) Product Photo Here The OVLFY3C7 is a high-intensity AlInGaP LED mounted in a clear plastic T-13/4 package. Its UV-resistant epoxy lens makes this device an optimal solution for outdoor applications. This LED provides a well-defined and even emission pattern. Applications x Traffic and pedestrian signals x Signage and architectural lighting x Backlighting x Automotive Part Number OVLFY3C7 Material AlInGaP Emitted Color Yellow Intensity Typ. (mcd) 5700 Lens Color Water Clear RoHS Moisture DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 10/05 Page 1 of 4 Round Yellow Through-hole LED (5 mm) OVLFY3C7 Absolute Maximum Ratings TA = 25oC unless otherwise noted Storage Temperature Range Operating Temperature Range Reverse Voltage Continuous Forward Current Power Dissipation Lead Soldering Temperature (3mm from the base of the epoxy bulb) Current Linearity vs. Ambient Temperature LED Junction Temperature Notes: 1. Solder time less than 5 seconds at temperature extreme. 2. Design of Heat Dissipation should be considered. 1 2 -40 ~ +100 C -40 ~ +85 C 5V 30 mA 100 mA 78 mW 260 C -0.5 mA/ C 125 C Peak Forward Current (10% Duty Cycle, 1KHz) Electrical Characteristics TA = 25oC unless otherwise noted SYMBOL Iv VF IR P D PARAMETER Luminous Intensity Forward Voltage Reverse Current Peak Wavelength Dominant Wavelength Spectra Half Width 50% Power Angle MIN 3115 ------------------- TYP 5700 2.2 ---593 589 25 30 MAX ---2.6 10 ------------- UNITS CONDITIONS IF = 20 mA IF = 20 mA VR = 5 V IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA mcd V A nm nm nm deg 21/2 Standard Bins (IF = 20mA) Luminous Intensity (mcd) Lamps are sorted to luminous intensity (IV) and dominant wavelength ( D) bins shown. Orders for OVLFY3C7 may be filled with any or all bins contained as below. 6105-8550 4360-6105 3115-4360 585 X W V Luminous intensity is at V bin or above. Dominant Wavelength (nm) 589 592 595 Forward Voltage (VF) Rank Voltage G 1.8-2.0 H 2.0-2.2 J 2.2-2.4 6 2.4-2.6 Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. 3. Pb content <1000 PPM.. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 10/05 Page 2 of 4 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Round Yellow Through-hole LED (5 mm) OVLFY3C7 Typical Electro-Optical Characteristics Curves mA % V Forward Current vs Forward Voltage V Relative Luminous Intensity vs Forward Current mA mA A Reverse Current vs Reverse Voltage Forward Current vs Ambient Temperature C % % Relative Luminous Intensity vs Wavelength nm Relative Luminous Intensity vs Ambient Temperature C Beam Pattern OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 10/05 Page 3 of 4 Round Yellow Through-hole LED (5mm) OVLFY3C7 Packing Information: Available in bulk or reel Bulk: 500 pcs/bag 13-inch reel: 1000 pcs/reel Carrier Tape Dimensions: Loaded quantity 1000 pieces per reel Moisture Resistant Packaging Label Aluminum Moisture-proof Bag Desiccant Bar Code Label OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 10/05 Page 4 of 4 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com |
Price & Availability of OVLFY3C7
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |